Steren RAD-010 Manual De Instrucciones página 28

APPENDIX
• CH: Channel to be modified.
• RX Frequency: Receiving frequency.
• TX Frequency: Transmission frequency.
• CTCSS /DCS Dec: CTCSS / DCS decodifier.
• CTCSS /DCS Enc: CTCSS / DCS encodifier. The radio can only communicate with radios having the same CTCSS / DCS
settings.
• TX power: Transmission frequency power.
• Scan Add: Select whether or not the channel will appear in the searching function.
• Channel spacing: Separation between channels.
If you want to activate the VOX function, go to the Edit menu, Function Setup Submenu.
SPECIFICATIONS
Input: 3.6 V - - - (rigid battery)
Frequency range: UHF 400 - 470 MHz
Channels: 16
Channel space: 12.5 kHz
Operating temperature range: -20 °C to +60 °C
Dimensions: 59 x 34 x 114 mm
Weight: 250 g
Transmitter: UHF
Transmission power: ≤3 W
Stabilization: ±2.5 ppm
Modulation mode: FM (F3E)
Spurious emissions: ≤-60 dB
FM noise: ≤-40 dB
Audio distortion: ≤5%
Adjacent channel power: ≥55 dB
Maximum frequency deviation: ≤±5 kHz
Receiver: UHF
Stabilization frequency: ±2.5 ppm
Sensitivity (at 12dB SINARD): <0.2 μV
FM receiver bandwidth: ≥±7 kHz
Adjacent channel selectivity: ≥60 dB
Intermodulation reject average: ≥60 dB
Spurious wave anti-interference: ≥60 dB
Audio power output: 400 mW
13
Specifications may vary without previous notice
Charger Base
Input: 120 V~ 7 W
Output: 3.8 V - - - at 500 mA
battery: 3.6 V - - - 1 300 mAh