Publicidad
Operation & Setting & Troubleshooting
Height memory function
Anti-Collision function
sensitivity adjustment
a.When the desk is in a static state, long press the
button " " for three seconds, the display shows
"
", which means the save is successful.
b.Buttons "
", "3", and "4" all have the same height
memory function as button " ", repeat the above
steps to save the height to the corresponding position
" " or 3 or 4, and the display screen will corresponding
show "
" or "
" or "
c.When the tabletop is at any height, press the " "
or "
" or "3" or "4" button to automatically adjust
to the previous saved location.
a. Press and hold the " " " " button for 3 seconds at
the same time to switch the sensitivity. There are
four levels of sensitivity (A-3, A-2, A-1, A-0). Each
operation will switch the sensitivity into the next level.
b. The display shows " ", the anti-collision function
is off; the display shows " ", low sensitivity;
Display shows " ", medium sensitivity; display
shows " ", high sensitivity;
c. During height adjustment, when tabletop comes in
contact with another object, it instantly stops and
reverses to avoid damage.
24
".
Publicidad
