Amazon Basics B0CP7SD8SW Manual Del Usuario página 11

Adjusting the Settings
Short press or push the control button up, down, left, or right to open the main menu. Use
the options in the following Picture, Color, Audio, Gaming, OSD (on-screen display), System,
and Information menus to adjust your monitor's settings.
When you re finished, press the control button left repeatedly to exit the main menu. See
"Using the Control Button" for more information on navigating the menu.
Picture
Modes: Optimize picture quality for general content. Choose between Action, Racing,
»
Sports, User, Standard, ECO, Graphics, or HDR.
Brightness: Adjust the balance between light and dark shades. Choose a setting from 0
»
(dimmest) to 100 (brightest).
Contrast: Adjust the degree of di erence between light and dark areas. Choose a setting
»
from 0 (least contrast) to 100 (most contrast).
Black Boost: Boost the amplitude of the dark color levels of the display, making blacks
»
less black. The higher the level, the higher the boost.
Blue Light: When turned on, this filters out blue light by adjusting the ratio of blue light
»
that is displayed.
DCR (Dynamic Contrast Ratio): Adjust the backlight based on what is displayed on your
»
screen.
HDR (High Dynamic Range): Adjust the HDR auto or o . The default is o .
»
Color
Gamma: Adjust the luminance tone. The default value is 2.2 (standard value for
»
Windows).
Color Space: Choose sRGB, Rec. 709, HDR, EBU, SMPTE-C or Standard. Default is
»
standard.
Color Temp.: Change the color temperature. Choose between Warm, Normal, Cool or
»
User. The default is Warm.
Audio
Volume: Adjust the volume.
»
Mute: Turn the sound on or o .
»
Gaming
Over Drive: Prevent motion blur in fast-moving images. Choose between O , Normal, or
»
Extreme.
Adaptive-Sync: When turned on, this eliminates tearing and stuttering. The default is
»
On.
MPRT: Turn MRPT on or o . The default is o .
»
Refresh Rate Num: Display the screen's current refresh rate.
»
Aim Point: Show an Aim point of the screen for shooting games.
»
EN
11