IKEA SOLSTOL Manual De Instrucciones página 4

English
Read instructions carefully and keep for future
reference.
SOLSTOL lock allows the user to easily lock cabinets and drawers with
the included pre-paired key tags. SOLSTOL lock can be mounted on
most IKEA cabinets and drawers.
Product features
• The lock comes with two pre-paired key tags.
• Other Type-A key tags compliant with ISO/IEC 14443 can be paired
with the lock.
• Single Type-A key tag compliant with ISO/IEC 14443 can be paired
with any number of SOLSTOL locks.
• The lock emits a warning signal when the batteries run low.
• Safety feature opens the lock before the batteries die.
IMPORTANT!
• The lock fits cabinet doors and drawer fronts which are less
than 30 mm thick.
• The lock is not suitable for metal or glass cabinets and drawers.
Instructions for use
• Install the lock and lock-plate according to the assembly instructions
for your product. Ensure that nothing is blocking the lock's pin after
installation. If the pin is obstructed when locking/unlocking, the lock
will emit a signal that indicates this.
• Insert batteries and check that both the pre-paired key tags work
with the lock before first use.NOTE! The package does not include
batteries.
• To lock/unlock, hold the paired key tag close to the reader. If an
unpaired key tag is used, the lock will emit a signal that indicates
this.
• If batteries run low, the lock will emit a low battery warning signal
every 4 hours and every time it is locked/unlocked. Replace the
batteries promptly. If the batteries are not replaced before they die,
the lock will open automatically and remain open.
• To reset the lock, press and hold the button for 10 seconds. Note! All
paired key tags will have their current pairing erased.
TIP!
We recommend that you put one of the paired key tags in a safe place
as a spare key. Note! there are no spare key tags available at IKEA.
4