Allice Messtechnik E3N Manual De Instrucciones página 14

www.allice.de
Thank you for purchasing an E3N AC/DC current clamp, which we trust will give you satisfaction.
For best results from your instrument:
„ read this user manual carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to this user's manual whenever this
danger symbol appears.
Equipment protected by double insulation.
May be placed on and removed from conductors at dangerous voltages. Type A current sensor
as per IEC 61010-2-032.
Battery.
The CE marking indicates conformity with LVD and EMC European directives.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2002/96/EC.
Definition of measurement categories:
„ Measurement category IV corresponds to measurements taken at the source of low-voltage
installations.
Example: power feeders, counters and protection devices.
„ Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
„ Measurement category II corresponds to measurements taken on circuits directly connected to
low-voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
Allice Messtechnik GmbH
ENGLISH
Useful information or tip.
To identify the phase of the current.
14