Descargar Imprimir esta página

Black and Decker LSW36 Manual De Instrucciones página 9

Barredora para superficies duras con bateria de iones de litio de 40 v max
Ocultar thumbs Ver también para LSW36:

Publicidad

Idiomas disponibles

Idiomas disponibles

z_CAUTION:
Always wear safety
glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long
pants and substantial footwear is
recommended.
Keep long hair and loose
clothing away from openings and moving
parts. THIS SWEEPER IS FOR
HOUSEHOLD USE ONLY.
NOTE:
Ensure the sweeper is switched
off and the battery is removed before
attaching or removing the sweeper tubes.
The sweeper tube must be assembled
to the housing before use. Install battery
after assembly just prior to use.
• Hold the sweeper with one hand as shown in figure G and sweep
from side to side with the nozzle several inches above the hard
surface. Slowly advance keeping the accumulated
pile of debris in
front of you.
CLEANING AND STORAGE
Z_WARNING: SHOCK HAZARD. DO NOT POUR OR SPRAY
WATER ON THE TOOL iN AN ATTEMPT TO CLEAN.
z-_CAUTION: TURN OFF AND REMOVE BATTERY FROM TOOL.
Problem
• Unit witl not turn on.
Solution
• Check battery installation.
• Check battery charging
requirements.
• Battery witl not charge.
• Insert battery into charger until
green LED appears.
• Plug charger into a working
outlet. Refer to "Important
Charging Notes"for more details.
• Checkcurrent at receptacle by
pluggingina lampor otherappliance.
• Checkto see if receptacleis
connected to a lightswitchwhichturns
poweroffwhen youturnout the lights.
• Move charger and tool to a
surrounding air temperature of
above 40 degree F(4.5°C) or
below 105 degree F(+40.5°C).
For assistance with your product, visit our website www.blackanddecker.
corn for the location of the service center nearest you or call the BLACK &
DECKER help lineat 1-800=544-6986.
Use only mild soap and a damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the tool into a
liquid. Your Sweeper should be stored in a dry place.
Do not store the tool on or adjacent to fertilizers or chemicals. Such
storage can cause rapid corrosion of the metal parts.

Publicidad

loading