AIR FILTER REGULATOR &
LUBRICATOR PDWE 8 B2
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner.
Intended use
The compressed air maintenance unit is used to oil
the compressed air for compressed air tools, and
filters out condensate from the compressed air at
the same time. Use the product only as described
and for the range of applications specified. Retain
these instructions for future reference. Pass all rele-
vant documents to any future owner. Any use which
deviates from the intended use is prohibited and
potentially dangerous. Damage caused by failure
to observe the instructions or misuse is not covered
by the warranty and does not fall under the manu-
facturer's liability. The appliance is designed for
domestic use and must not be used for commercial
or industrial purposes.
■
2
│
GB │ IE
Symbols on the compressed air tool
Read the operating instructions
WARNING!
before use.
Wear a dust mask.
Wear protective goggles.
Wear hearing protection.
Wear protective gloves.
Features
1 Filter unit
2 Connector nipple (pre-assembled)
3 Air pressure regulator
4 Compressed air manometer
5 Wall bracket
6 Oil refill inlet
7 Oil outlet screw
8 Quick coupling
9 Oil mister unit
0 Locking ring
q Container for compressed air oil
w Drain valve
e Condensate collector
r Filter insert
Package contents
1 air Filter Regulator & Lubricator
including connections
1 mounting accessories
(2x mounting screws, 2x wall plugs)
1 set of operating instructions
Technical specifications
Working pressure
max. 8 bar
Oil
suitable compressor oil
PDWE 8 B2