Orbegozo DP 2800 Manual De Instrucciones página 11

DP 2800
• Place the foot spa on the floor and plug it into the mains supply. Remain seated while placing your feet in and
taking them out of the foot spa.
• Select the desired setting (Fig. 3).
- 0: Off
- 1: Massage,
- 2: Heat and bubbles
- 3: Massage, heat and bubbles
• Move your foot back and forth for a pleasant massage.
• You should not spend more than 20 minutes on this massage application. The massage should feel pleasant:
Switch the foot spa off if it feels uncomfortable and consult your doctor to rule out any problems.
• Optional massage roller, as shown on Figure 4.
• The foot spa has a splash guard. This can be removed if you wish, as shown in figure 5. To fit it back on, just
insert the lugs into their respective holes.
• Before emptying the foot spa, turn the On/Off switch to «0» and unplug it from the mains. Unplug the unit
and allow it to cool before cleaning. Tilt the foot spa over a basin to allow the water to drain out through the
drain hole, located at the front of the appliance (Fig. 6). Prevent any water from getting on to the function
selector.
11