Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Copyright©2004 ASRock INC. All rights reserved.
ASRock 775i65PE Motherboard
Published October 2004
1 1 1 1 1

Publicidad

Tabla de contenido
loading

Resumen de contenidos para ASROCK 775i65PE

  • Página 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Página 2 Primary Serial ATA Connector (SATA1) BIOS FWH Chip Secondary Serial ATA Connector (SATA2) AGP Slot (1.5V_AGP1) Clear CMOS Jumper (CLRCMOS0) ATX Power Connector (ATXPWR1) FSB Select Jumper (FSB_SEL1) CPU Fan Connector (CPU_FAN1) Chassis Fan Connector (CHA_FAN1) 2 2 2 2 2 ASRock 775i65PE Motherboard...
  • Página 3 TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker (No. 7) (No. 4) (No. 5) (No. 3) 3 3 3 3 3 ASRock 775i65PE Motherboard...
  • Página 4: Package Contents

    1. Introduction 1. Introduction 1. Introduction 1. Introduction Thank you for purchasing ASRock 775i65PE motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
  • Página 5 PCI LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN Hardware Monitor: CPU temperature sensing, Chassis temperature sensing, CPU overheat shutdown to protect CPU life (ASRock U-COP)(see CAUTION 5), CPU fan tachometer, Chassis fan tachometer, Voltage monitoring: +12V, +5V, +3.3V, Vcore PCI slots: 5 PCI slots with PCI Specification 2.3...
  • Página 6 For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports 2-channel, 4-channel, 6-channel, and 8-channel modes. Please check the table on page 3 for proper connection. 6 6 6 6 6 ASRock 775i65PE Motherboard...
  • Página 7 CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. 7 7 7 7 7 ASRock 775i65PE Motherboard...
  • Página 8 Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. 8 8 8 8 8 ASRock 775i65PE Motherboard...
  • Página 9 Step 5. Connect fan header with the CPU fan connector on the motherboard. Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. 9 9 9 9 9 ASRock 775i65PE Motherboard...
  • Página 10 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 775i65PE motherboard provides four 184-pin DDR (Double Data Rate) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR DIMM pair in the slots of the same color.
  • Página 11 DIMM if you force the DIMM into the slot at incorrect orientation. STEP 3: Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock 775i65PE Motherboard...
  • Página 12 PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Página 13 CMOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action. ASRock 775i65PE Motherboard...
  • Página 14 SATA2 interface allows up to 1.5 Gb/s data transfer rate. Serial ATA (SATA) Either end of the SATA data cable Data Cable can be connected to the SATA hard disk or the SATA connector on the motherboard. ASRock 775i65PE Motherboard...
  • Página 15 SATA power cable to the power connector of the power supply. USB 2.0 Header ASRock 8CH I/O accommo- dates 4 default USB 2.0 ports. If (9-pin USB67) those USB 2.0 ports on the I/O (see p.2 No. 17) panel are not sufficient, this USB 2.0 header is available to...
  • Página 16 Please note that it is necessary to connect a power supply with (4-pin ATX12V1) ATX 12V plug to this connector (see p.2, No. 2) so that it can provides sufficient power. Failing to do so will cause the failure to power up. ASRock 775i65PE Motherboard...
  • Página 17 OnBoard IDE Operate Mode option in BIOS setup is correct according to the condition of your system. For the configuration details, please refer to the instruction on page 28 of “User Manual” in the Support CD. ASRock 775i65PE Motherboard...
  • Página 18 This motherboard is equipped with Intel LGA 775 socket, which is a new CPU socket interface that Intel has released. Since it has several tiny pins, whcih are easily to be damaged by improper handling, ASRock sincerely presents you a clear installation guide through this “LGA 775 CPU Installation Live Demo”.
  • Página 19 ASRock 775i65PE Motherboard...
  • Página 20 ® ® Intel ICH5, ASRock 775i65PE Motherboard...
  • Página 21 ® ® ASRock 775i65PE Motherboard...
  • Página 22 ASRock 775i65PE Motherboard...
  • Página 23 ASRock 775i65PE Motherboard...
  • Página 24 ASRock 775i65PE Motherboard...
  • Página 25 ASRock 775i65PE Motherboard...
  • Página 26 ASRock 775i65PE Motherboard...
  • Página 27 ASRock 775i65PE Motherboard...
  • Página 28 “ ” SATA1 SATA2 ASRock 775i65PE Motherboard...
  • Página 29 ASRock 775i65PE Motherboard...
  • Página 30 ASRock 775i65PE Motherboard...
  • Página 31 ASRock 775i65PE Motherboard...
  • Página 32 ® ® “LGA 775 CPU Installation Live Demo” ASRock 775i65PE Motherboard...
  • Página 33 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock 775i65PE Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Página 34 PCI LAN: Speed: 802.3u (10/100 Ethernet), unterstützt Wake-On-LAN Hardware Monitor: CPU Temperaturmessung, Messung der häuseinnentemperatur, CPU Shutdown bei Überhitzung, schützt die CPU vor dem Hitzetod (ASRock U-COP)(siehe VORSICHT5), Rotationskontrolle für CPU-Lüfter, Rotationskontrolle für Gehäuse-Lüfter, Spannungsüberwachung: +12V, +5V, +3.3V, Vcore PCI-Slots: 5 Slots nach PCI-Spezifikation 2.3...
  • Página 35 ASRock 8CH I/O (E/A):1 PS/2-Mausanschluss, 1 PS/2-Tastaturanschluss, 1 serieller port: COM 1, 1 paralleler port: Unterstützung für ECP / EPP 4 Standard-USB 2.0-Anschlüsse, 1 RJ-45 port, Audiobuchse: Lautsprecher seitlich / Lautsprecher hinten / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon...
  • Página 36 Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock 775i65PE Motherboard...
  • Página 37 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel. ASRock 775i65PE Motherboard...
  • Página 38 Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS). Schritt 4-2. Drücken Sie leicht auf die Ladeplatte und schließen Sie den Ladehebel. Schritt 4-3. Sichern Sie Ladehebel und Ladeplatte mithilfe des Hebelverschlusses. ASRock 775i65PE Motherboard...
  • Página 39 Uhrzeigersinn zu drehen, wird der Kühlkörper nicht ordnungsgemäß am Motherboard befestigt. Schritt 5. Schließen Sie den Lüfter an den CPU- Lüfteranschluss des Motherboards. Schritt 6. Befestigen Sie überschüssiges Kabel mit Band, um eine Störung des Lüfters oder Kontakt mit anderen Teilen zu vermeiden. ASRock 775i65PE Motherboard...
  • Página 40 2.3 Installation der Speichermodule (DIMM) Die Motherboards 775i65PE bieten vier 184-pol. DDR (Double Data Rate) DIMM- Steckplätze und unterstützen die Dual-Kanal-Speichertechnologie. Für die Dual- Kanalkonfiguration dürfen Sie nur identische (gleiche Marke, Geschwindigkeit, Größe und gleicher Chiptyp) DDR DIMM-Paare in den Steckplätzen gleicher Farbe installieren.
  • Página 41 Steckplätze zu zwingen, führt dies zu dauerhaften Schäden am Mainboard und am DIMM-Modul. Schritt 3: Drücken Sie die DIMM-Module fest in die Steckplätze, so dass die Halteklammern an beiden Enden des Moduls einschnappen und das DIMM-Modul fest an Ort und Stelle sitzt. ASRock 775i65PE Motherboard...
  • Página 42 2.4 Erweiterungssteckplätze (PCI und AGP-Slots): Es stehen 5 PCI- und 1 AGP-Slot auf dem 775i65PE Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. AGP-Slot: Der AGP-Steckplatz dient zur Installation einer Grafikkarte. Der ASRock AGP-Steckplatz hat speziell entwickelte Klammern, die die eingefügte Grafikkarte sicher festhalten.
  • Página 43 CMOS gelöscht wurde. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Wenn Sie den CMOS-Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen. ASRock 775i65PE Motherboard...
  • Página 44 (SATA2: siehe S.2 - No. 11) Massenspeichergeräte. Die aktuelle SATA-Schnittstelle SATA1 SATA2 ermöglicht eine Datenübertragungsrate bis 1,5 Gb/s. Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit der SATA-Festplatte oder dem SATA-Anschluss am Mainboard verbinden. ASRock 775i65PE Motherboard...
  • Página 45 Laufwerks. Verbinden Sie dann das weiße Ende des SATA- Stromversorgungskabels mit dem Stromanschluss des Netzteils. USB 2.0-Header ASRock 8CH I/O (E/A) verfügt über 4 Standard-USB 2.0- (9-pol. USB67) Anschlüsse auf der Rückseite. (siehe S.2 - Nr. 17) Wenn die hinteren USB- Anschlüsse nicht ausreichen,...
  • Página 46 Verbinden Sie die ATX- Stromversorgung mit diesem (20-pin ATXPWR1) Header. (siehe S.2 - No. 28) Game Port-Anschluss Verbinden Sie ein Game Port- Kabel mit diesem Anschluss, (15-pin GAME1) wenn der Game Port-Halter (siehe S.2 - No. 21) installiert ist. ASRock 775i65PE Motherboard...
  • Página 47 Vor Installation des Betriebssystems auf der SATA-Festplatte müssen Sie sicherstellen, dass die Konfiguration der Option “OnBoard IDE Operate Mode” im BIOS-Setup entsprechend den Bedingungen Ihres Systems richtig ist. Konfigurationsdetails finden Sie auf Seite 28 des Benutzerhandbuchs auf der Support CD. ASRock 775i65PE Motherboard...
  • Página 48 Dieses Motherboard ist bestückt mit Intel LGA 775 Sockel, dem neuen CPU- Sockel von Intel. Die CPU hat viele kleine Kontakte, die durch unsachgemäße Handhabung leicht beschädigt werden können, ASRock bietet Ihnen deshalb mit diesem „LGA 775 CPU Installation Live-Demo” eine klare und leicht verständliche Installationsanleitung.
  • Página 49: Contenu Du Paquet

    1. Introduction 1. Introduction Merci pour votre achat d’une carte mère ASRock 775i65PE, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des perfor- mances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité...
  • Página 50 Mesure de la température CPU, Mesure de la température du châssis, Coupure auto du CPU en cas de surchauffe pour protéger le CPU (ASRock U-COP)(voir ATTENTION 5), Tachymètre de ventilateur CPU, Tachymètre de ventilateur de châssis, Surveillance du voltage: +12V, +5V, +3.3V, Vcore Slots PCI: 5 slots PCI spécification 2.3...
  • Página 51 Ne PAS utiliser de carte AGP 3,3V AGP sur l’emplacement AGP de cette carte mère! Cela pourrait l’endommager de manière définitive! La gestion de l’alimentation pour l’USB 2.0 fonctionne bien sous ® ® Microsoft Windows XP SP1/2000 SP4. Elle peut ne pas fonctionner ASRock 775i65PE Motherboard...
  • Página 52 Si c’est le cas, ne forcez pas pour insérer le processeur dans le socket. Sinon, le processeur sera gravement endommagé. ASRock 775i65PE Motherboard...
  • Página 53 Etape 2-3. Mettez soigneusement en place le processeur dans le socle en un mouvement strictement vertical. Etape 2-4. Vérifiez que le processeur est bien installé dans le socle et que les encoches d’orientation sont dans la bonne position. ASRock 775i65PE Motherboard...
  • Página 54 Etape 2. Placez le dissipateur thermique sur le socket. Vérifiez que les câbles du ventilateur sont orientés vers le côté le plus proche du connecteur pour ventilateur de processeur sur la carte mère (CPU_FAN1, voir page 2, (Orifices des attaches ressortant) no. 29). ASRock 775i65PE Motherboard...
  • Página 55 Etape 6. Fixez la longueur de câble en excès avec du ruban adhésif pour vous assurer que le câble ne gênera pas le fonctionnement du ventilateur ou n’entrera pas en contact avec les autres composants. ASRock 775i65PE Motherboard...
  • Página 56 2.3 Installation des modules m émoire [DIMM] 2.3 Installation des modules m émoire [DIMM] La carte mère 775i65PE dispose de quatre emplacements DIMM DDR (Double Data Rate) de 184-broches, et supporte la Technologie de Mémoire à Canal Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDR identiques (de la même marque, de la même vitesse, de la...
  • Página 57 DIMM. Etape 3. Insérez fermement le module DIMM dans son emplacement jusqu’à ce que les clips de maintien situés aux deux extrémités se ferment complètement et que le module DIMM soit inséré correctement. ASRock 775i65PE Motherboard...
  • Página 58 2.4 Slot d’extension (Slots PCI et Slot AGP) 2.4 Slot d’extension (Slots PCI et Slot AGP) Il y a 5 slots PCI et 1 slot AGP sur les cartes mères 775i65PE. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Página 59 N’oubliez pas de retirer le cavalier avant après avoir restauré le CMOS. Si vous devez effacer la CMOS juste après avoir terminé la mise à jour du BIOS, vous devrez d’abord démarrer le système puis l’arrêter avant d’effectuer l’effacement de la CMOS. ASRock 775i65PE Motherboard...
  • Página 60 ATA (SATA) prennent en (SATA1: voir p.2 No. 10) charge les câbles SATA pour (SATA2: voir p.2 No. 11) les périphériques de stockage internes. L’interface SATA SATA1 SATA2 actuelle permet des taux transferts de données pouvant aller jusqu’à 1,5 Go/s. ASRock 775i65PE Motherboard...
  • Página 61 Connectez ensuite l’extrémité blanche du cordon d’alimentation SATA sur le connecteur d’alimentation de l’unité d’alimentation électrique. USB 2.0-Header ASRock 8CH I/O (E/A) verfügt über 4 Standard-USB 2.0- (9-pol. USB67) Anschlüsse auf der Rückseite. (siehe S.2 - Nr. 17) Wenn die hinteren USB- Anschlüsse nicht ausreichen,...
  • Página 62 ATX sur cet en- (ATXPWR1 br. 20) tête. (voir p.2 No. 28) Connecteur du port jeux Connectez un câble Port Jeux à ce connecteur si le support (15-pin GAME1) Port Jeux est installé. (voir p.2 No. 21) ASRock 775i65PE Motherboard...
  • Página 63 IDE Operate Mode” dans la configuration du BIOS en fonction de l’état de votre système. Pour les détails de la configuration, veuillez vous reporter aux instructions à la page 28 du “Manuel de l’utilisateur” sur le CD d’assistance. ASRock 775i65PE Motherboard...
  • Página 64 Intel. Etant donné qu’il possède plusieurs broches minuscules, qui sont facilement endommagées en cas de mauvaise manipulation, ASRock a pris le soin de vous proposer un guide d’installation clair par le biais de cette “Démo vidéo d’installation de processeur LGA 775”.
  • Página 65: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock 775i65PE, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Página 66 4 porte USB 2.0 sono già incluse sul pannello posteriore, più una guida aggiuntiva che supporta altre 4 porte USB 2.0 (vedi ATTENZIONE 7) ASRock 8CH I/O: 1 port souris PS/2, 1 port clavier PS/2 1 port série:COM 1 1 port parallèle: Support ECP/EPP...
  • Página 67 Pour l’entrée microphone, cette carte mère supporte les deux modes stéréo et mono. Pour la sortie audio, cette carte mère supporte les modes 2- canaux, 4-canaux, 6-canaux et 8-canaux. Veuillez vous référer au tableau en page 3 pour effectuer la bonne connexion. ASRock 775i65PE Motherboard...
  • Página 68 Non forzare l’inserimento della CPU nel socket se ci sono pin piegati. In caso contrario la CPU potrebbe essere seriamente danneggiata. Fase 1. Aprire la presa: Fase 1-1. Sbloccare la leva premendola verso il basso ed allontanandola dal gancio per liberare la linguetta. ASRock 775i65PE Motherboard...
  • Página 69 CPU con le due tacche nel socket. Fase 2-3. Collocare con delicatezza la CPU sulla presa con un movimento puramente verticale. Fase 2-4. Verificare che la CPU sia all’interno della presa e combaci in modo appropriato con le chiavi d’orientamento. ASRock 775i65PE Motherboard...
  • Página 70 Fase 4-2. Bloccare la leva di carico mentre si preme leggermente sulla piastra di carico. Fase 4-3. Fissare la leva di carico con la linguetta della piastra di carico che si trova sulla parte inferiore della linguetta di ritenzione della leva di carico. ASRock 775i65PE Motherboard...
  • Página 71 CPU sulla scheda madre. Fase 6. fissare il cavo in eccesso con fascette per assicurare che il cavo non interferisca con il funzionamento della ventola o che venga a contatto con gli altri componenti. ASRock 775i65PE Motherboard...
  • Página 72 2.3 Installazione dei moduli di memoria (DIMM) 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre 775i65PE fornisce quattro alloggiamenti DIMM DDR (Double Data Rate) a 184 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR negli alloggiamenti...
  • Página 73 DIMM stessa. Step 3. Inserire saldamente la DIMM nello slot fino a far scattare completamente in posizione i fermagli di ritegno alle due estremità e fino ad installare correttamente la DIMM nella sua sede. ASRock 775i65PE Motherboard...
  • Página 74 2.4 Slot di espansione (PCI e slot AGP) 2.4 Slot di espansione (PCI e slot AGP) Esistono 5 slot PCI e 1 slot AGP su entrambe le schede madri 775i65PE. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Página 75 CMOS. Se si deve cancellare il CMOS non appena terminato l’aggiornamento del BIOS, prima di eseguire tale operazione di cancellazione è necessario riavviare innanzitutto il sistema, e quindi spegnerlo. ASRock 775i65PE Motherboard...
  • Página 76: Collettori E Connettori Su Scheda

    (SATA1: vedi p.2 Nr. 10) dati SATA per dispositivi di (SATA2: vedi p.2 Nr. 11) immagazzinamento interni. ATA (SATA) supportano cavi SATA1 SATA2 SATA per dispositivi di memoria interni. L’interfaccia SATA attuale permette velocità di trasferimento dati fino a 1.5 Gb/s. ASRock 775i65PE Motherboard...
  • Página 77 SATA l’estremità bianca del cavo di alimentazione SATA a connettore power dell’alimentatore. Collettore USB 2.0 Il dispositivo ASRock 8CH I/O mette a vostra disposizione 4 (9-pin USB67) porte USB 2.0 di default sul (vedi p.2 No. 17) pannello posteriore. Se le porte USB posteriori non sono sufficienti, è...
  • Página 78 ATX a questo (20-pin ATXPWR1) connettore. (vedi p.2 Nr. 28) Connettore porta giochi Collegare un cavo porta giochi a questo collettore se la staffa (15-pin GAME1) per la porta giochi è installata. (voir p.2 Nr. 21) ASRock 775i65PE Motherboard...
  • Página 79 BIOS che la configurazione della modalità operativa dell’IDE su scheda sia corretta in relazione alle condizioni del proprio sistema. Per i dettagli sulla scongiurazione, fare riferimento alle istruzioni di pagina 28 del “Manuale dell’utente” contenuto nel CD di supporto. ASRock 775i65PE Motherboard...
  • Página 80 CPU rilasciata da Intel. Poichè è dotata di una serie di pin molto sottili, che possono essere facilmente rovinati se non utilizzati correttamente, ASRock presenta una guida all’installazione molto chiara con questo “Demo installazione CPU LGA 775”. Ci auguriamo che questo demo venga consultato prima di procedere all’installazione della CPU LGA 775 per ridurre i rischi di danni alla CPU e...
  • Página 81: Introducción

    1. Introducción 1. Introducción Gracias por su compra de ASRock 775i65PE placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Página 82: Especificación

    Monitor Hardware: Sensor para la temperature del procesador, Sensor para la temperatura del Chasis, Corte automático en caso de temperatura sobre-elevada de CPU (ASRock U-COP)(vea ATENCIÓN 5), Taquímetro del ventilador del CPU, Taquímetro del ventilador del Chasis, Monitor Voltaje: +12V, +5V, +3.3V, Vcore Ranuras PCI: 5 ranuras con PCI especificación 2.3...
  • Página 83 XP SP1/2000 SP4. Es posible que no funcione propiamente ® ® bajo Microsoft Windows 98/ME. Para la entrada de micrófono, esta placa madre ofrece soporte para modos estéreo y mono. Para salida de audio, este placa madre ofrece ASRock 775i65PE Motherboard...
  • Página 84: Instalación

    CPU se encuentra limpia y no hay ninguna aguja torcida en el socket. No introduzca la CPU en el socket por la fuerza si se produce la situación anterior. Si lo hace, puede producir daños graves en la CPU. ASRock 775i65PE Motherboard...
  • Página 85 Step 2-3. Coloque con cuidado la CPU en el socket con un movimiento totalmente vertical. Step 2-4. Compruebe que la CPU se encuentra en el socket y la orientación coincide con la indicada por las muescas. ASRock 775i65PE Motherboard...
  • Página 86: Instalación Del Ventilador Y El Disipador De La Cpu

    A continuación se ofrece un ejemplo para ilustrar la instalación del disipador para la CPU de 775 agujas. Paso 1. Aplique el material termal de interfaz en el (Aplique el material termal de interfaz) centro del IHS de la superficie del socket. ASRock 775i65PE Motherboard...
  • Página 87 CPU en la placa madre. Paso 6. Fije el cable que sobre con un lazo para asegurarse de que el cable no interfiere en el funcionamiento del ventilador y tampoco entra en contacto con otros componentes. ASRock 775i65PE Motherboard...
  • Página 88: Instalación De Memoria

    2.3 Instalación de Memoria 2.3 Instalación de Memoria La placa 775i65PE ofrece cuatro ranuras DIMM DDR de 184 pines, y soporta Tecnología de Memoria de Doble Canal. Para la configuración de doble canal, necesitará instalar siempre pares DIMM DDR idénticos (de la misma marca, velocidad, tamaño y tipo) en las ranuras del mismo color.
  • Página 89 DIMM. Paso 3. Inserte la DIMM con firmeza dentro de la ranura hasta que los clips de sujeción de ambos lados queden completamente introducidos en su sitio y la DIMM se haya asentado apropiadamente. ASRock 775i65PE Motherboard...
  • Página 90: Ranuras De Expansion (Ranuras Pci Y Agp)

    2.4 Ranuras de Expansion (Ranuras PCI y AGP) 2.4 Ranuras de Expansion (Ranuras PCI y AGP) Hay 5 ranuras PCI y 1 ranura AGP sobre las placas mardres 775i65PE. Ranura PCI: Para instalar tarjetas de expansión que tienen 32-bit Interface PCI.
  • Página 91: Setup De Jumpers

    COMS. Si necesita borrar la CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de realizar la acción de borrado de CMOS. ASRock 775i65PE Motherboard...
  • Página 92: Cabezales Y Conectores En Placas

    SATA actual permite SATA1 SATA2 una velocidad de transferencia de 1.5 Gb/s. Cable de datos de Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA o la conexión de la placa base. ASRock 775i65PE Motherboard...
  • Página 93 SATA a la conexión de alimentación de la fuente de alimentación. Cabezal USB 2.0 ASRock 8CH I/O le proporciona 4 puertos USB 2.0 (9-pin USB67) predeterminados en el panel (ver p.2, No. 17) posterior.
  • Página 94 ATX a su cabezal. (20-pin ATXPWR1) (vea p.2, N. 28) Conector de puerto de juegos Conecte un cable de Puerto de juegos a este conector si el (15-pin GAME1) Puerto de Juegos está (vea p.2, N. 21) instalado. ASRock 775i65PE Motherboard...
  • Página 95 Operate Mode” en la BIOS está correcta según la condición de su sistema. Para obtener detalles sobre la configuración, consulte las instrucciones que aparecen en la página 28 del “Manual del usuario” en el CD de soporte. ASRock 775i65PE Motherboard...
  • Página 96: Bios Información

    CPU que Intel ha desarrollado. Ya que es fácil dañar sus pequeñas agujas si no se manejan de la manera adecuada, ASRock proporciona una guía de instalación clara y concisa mediante esta “Demo de instalación de la CPU LGA 775”. Le recomendamos que ejecute este programa de demostración antes de...

Tabla de contenido