Connecting The Inputs - dBTechnologies es602 Manual Del Usuario

English
4. Now insert the speaker assembly from the TOP A side using the hole
located on the bottom side.
ATTENTION!
• Make sure that ES-TOP A is firmly in
place, but never forcibly rotate it during
installation, do avoid damaging the
coupling system.
• Never transport the ES-TOP A and ES-TOP
B speakers while they are coupled to each
other; always detach them when carrying
them to avoid damaging the couplings.
• For ES 802 only, make sure that you install
ES-TOP A on the pole as shown in the
figure and and not ES-TOP B, as the cable
needs to be connected from the subwoofer
to this specific satellite.

CONNECTING THE INPUTS

MIXER / LINE
AUX IN
ES 602 - 802 REV. 1.1
ES-TOP A
MICROPHONE
AUX IN
Cod. 420120228 REV. 1.2
31