LawnMaster LMRM1601 Manual Del Operario página 11

ASSEMBLY
WARNING
Always keep hands clear of blades when attaching handle to frame. Not doing so can result in serious
injury!
ADJUSTING THE CUTTING HEIGHT (See Fig. 5)
The cutting height can be adjusted to between approximately 1.2-2.4 inch.
■ Move the right-hand height adjustment lever outward and then position it forward (to lower
the cutting height) or rearward (to raise the cutting height) before releasing it into the notch
for your desired height.
■ Repeat Step 1 on the left-hand side making sure to release the height adjustment lever into
the corresponding notch.
NOTE: Never mow your lawn at the mowers lowest setting as this can cause lawn to turn brown or die.
Fig. 5
11