TwinStar 23MM1424 Manual De Instrucciones página 6

9. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 8. Then locate
Mantel/Top (G) and lay f nished side up on
top of completed assembly. From the inside,
attach the Mantel using Bolts (L) and Washers
(M) through the pre-drilled holes in the
mounting blocks.
10. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
11. Locate Side Back Panel (K) and Center Back
Panel (R), attach to the back of the completed
assembly from step 10. Use a Phillips Head
screwdriver, tighten screws (Q) through
the pre-drilled holes in the Back Panels to the
completed assembly.
E-5
Mantel/Top
N
N
Q
Q
K
Side
Back
Panel
G
M
L
Center Back
Panel
R
Side
Back
Panel
N
N
K