Princess Robot Vacuum Deluxe 339000 Manual De Usuario página 12

Instruction manual
Error codes for motor
Error code Cause
L01X Fan overloaded
L0X1 Left wheel overloaded
L0X2 Right wheel overloaded
L0X3 Left and right wheels overloaded
L0X4 Left side brush overloaded
L0X5 Left wheel and left side brush
overloaded
L0X6 Right wheel and left side brush
overloaded
L0X7 Left and right wheels, left side
brush overloaded
L0X8 Right side brush overloaded
L0X9 Left wheel and right side brush
overloaded
L0XA Right wheel and right side brush
overloaded
L0XB Left and right wheels, right side
brush overloaded
L0XC Left and right side brushes
overloaded
L0XD Left wheel, left and right side
brushes overloaded
L0XE Right wheel, left and right side
brushes overloaded
L0XF Left and right wheels, left and right
side brushes overloaded
L02X Roller brush overloaded
12
Solution
Check if fan is pressed, and clean dust
bin
Check if it is stuck or wired by
obstacles
Panel display codes
LO
11:11
FULL
CONN
FAIL
SUCC
Note:
• The App will show detailed error information.
• There is no problem for the Cleaner when it displays L000.
• X marks the spot where number or letter might appear on the display for
different faults.
• If Cleaner displays E001 or E004, please directly find the relative solution
referred in troubleshooting.
• If Cleaner displays EC07, please find ECXX and EXXX for relative solution
referred in troubleshooting.
• Likewise, if Cleaner displays EE91, please find EXX1, EEXX and EX9X for
relative solution referred in troubleshooting.
• If above solution does not work, please try below:
a) Reset the Cleaner by switching off the machine, then turn it on and
check again.
b) If it still does not work after reset, contact the after sales.
Low battery
Charging
Charging completed
WIFI connecting
WIFI connection failed
WIFI disconnect succeed