SEVERIN VL-8630 Instrucciones De Uso página 8

Before using the appliance for the first time
Remove all packaging completely before the
appliance is used for the first time.
Assembly
- Remove the central grille locking ring
from the motor housing by turning it
anti-clockwise.
- Put the rear grille in position. The two
alignment pins on the motor housing
must fit into the corresponding slots in
the grille.
- Fit the central grille locking ring and turn
it clockwise to tighten it.
- Push the fan-blade unit onto the drive
shaft; ensure that the pin on the shaft is
properly engaged in the corresponding
recess on the unit.
- Fit the fan-blade mounting nut and turn
it anti-clockwise to tighten it.
- Place the retaining ring onto the rim of
the rear grille. (The retaining ring locking
screw may have to be loosened).
- Place the front grille in front of the rear
grille into the retaining ring and tighten
the retaining ring screw. Ensure that both
grille rims are correctly positioned in
each of the corresponding recesses inside
the retaining ring.
Operation
- Insert the plug into a suitable wall socket.
- To adjust the tilt angle of the fan head,
simply push the grille upwards or
downwards. The fan head assembly
automatically locks into its various
positions.
- In addition, the oscillation function can
be engaged by pushing the control knob
in.
- The fan speed is adjustable by means of
the four switches. At the '0' setting, the
fan is switched off.
General Care and Cleaning
●
Remove the plug from the wall socket
before cleaning.
●
To avoid the risk of electric shock, do not
clean the appliance with water and do
not immerse it in water.
●
Do not use abrasives or harsh cleaning
solutions.
- If it becomes necessary, clean the fan
with a dry lint-free cloth only.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of
two years from the date of purchase. Under
this guarantee the manufacturer undertakes
to repair or replace any parts found to be
defective, providing the product is returned
to one of our authorised service centres. This
guarantee is only valid if the appliance has
been used in accordance with the
instructions, and provided that it has not
been modified, repaired or interfered with
by any unauthorised person, or damaged
through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as glass
and ceramic items, bulbs etc. If the product
fails to operate and needs to be returned,
pack it carefully, enclosing your name and
address and the reason for return. If within
the guarantee period, please also provide the
guarantee card and proof of purchase.
8