Package Contents - TaoTronics TT-AD002 Instrucciones De Uso

EN

Package Contents

· 1 x TaoTronics Aroma Diffuser (Model: TT-AD002)
· 1 x Power Adapter
· 1 x Cup
· 1 x User Guide
Specifications
Model TT-AD002
Operate Voltage DC 24V
Power 13W max
Water Tank Volume 300 ml / 10 oz
Working time 8 hours max
Max Humidity Increase About 30 ~ 70 ml / 1 ~ 2 oz per hour
Ultrasonic Frequency 2.4 MHz
How to Use
Caution
1) Please add water to the tank first, then pour essential oils up to the
marking on the tube or until dispensing starts. If there's no
fragrance, the water-oil balance may be off. Please add enough
essential oil as instructed then.
2) If you are using a glass essential oil tube, please handle with care
to avoid breakage.
3) It is recommended to use purified or distilled water.
01
Add and Drain Water
1. Remove the tank cover, add water into the tank no higher than the
max water level line. Drizzle a few drops of essential oil into the
tube until dispensing starts. Put the tank cover back on.
2. Clean the water tank with the included brush when grime builds up.
Note:
Never pour essential oils into the tube when there is no water inside
the tank.
Operations and Functions
Connect to a power source. Once connected the diffuser will enter
standby mode. Please make sure there is enough water inside the tank.
Power On
Press the Mist Button to turn on the unit.
Change the Mist Output
Press and hold the Mist Button to enter high mist with one beep and low
mist with two beeps.
Change the Light Color
1. Press the Light Button once to automatically cycle through different
colors.
2. Press again to stay on the current color. Keep pressing to cycle through
all the colors. When the cycle is done, press one more time to turn off
the light.
3. Or press and hold the Light Button for 2-3 seconds to turn off the light.
Set the Timer
When the mist is on, press the Mist Button to set 1 / 3 / 6 hour timer or
turn off the timer. The timer indicator will light up accordingly. When the
ON indicator is on, the timer is off.
02