Aimpoint Micro H-2 Manual De Usuario página 12

4
TROUBLESHOOTING
The red dot does not appear or has disappeared
Clean contact surfaces in the battery compartment and verify that
the Battery (7) is working and that it is installed correctly according
to 2.1.1. Verify that there is zero gap between the Battery cap (6)
and the battery compartment. See Fig. 6. If the Rotary switch (8) is
defective, notify local dealer/armourer.
Fig. 6 The battery compartment with battery cap
The sight is impossible to zero
If an adjustment screw (4) (5) is at its limit, check the alignment of
mount and barrel. If point of impact is moving, check the stability of
mount and weapon rail (or carry handle).
The front lens of the sight is tilted. Has the sight been damaged?
No. The optical system is designed for the front lens to be mounted
in this way.
11