Installation - ClearSounds CR200 Manual De Instrucciones

INSTALLATION

Installation of your ClearSounds® CR200 ClearRing
Amplified Telephone Ring Signaler is easy.
If at any time you have questions about your ring signaler
after reading this manual, please contact our ClearSounds®
Customer Service Department at 1-800-965-9043.
PARTS CHECKLIST
Check the contents of the box - The CR200 should contain:
1. Ring Signaler
2. AC Power Adapter
3. Telephone line cord
4. User's Manual
Your CR200 is ready for use. Next, simply adjust the settings to fit your needs.
1. Connect the modular end of the AC power adapter into
the 9V DC jack on the back of the CR200 and then
plug the other end into a standard AC wall outlet.
2. Connect one end of the telephone cord to the LINE IN
jack on the back of the CR200 and connect the other
end to a modular phone jack.
3. Optional: Connect your telephone to the LINE OUT
jack on the back of the CR200. Note: The CR200
can operate independently without a telephone.
4. Optional: Connect the optional bed shaker into the
shaker jack on the back of the CR200 and place the
shaker under your pillow or mattress.
6 – ENGLISH