Ossa TR 280 Manual De Usuario página 120

Troubleshooting
PROBLEM
The shock absorption is too soft
The motorcycle makes abnormal
noises
In the event of breakdown always take the motorcycle to a specialist mechanic
50 User manual
POSSIBLE CAUSE
- Too little oil in front fork
- Front fork oil not sufficiently viscous
- Front fork bent
- Rear shock absorber badly adjusted
- Chain badly adjusted
- Chain wear
- Rear crow teeth wear
- Insufficient chain lubrication
- Rear wheel badly adjusted
- Front fork with insufficient oil
- Front fork spring weak or broken
- Brake disc wear
- Brake pads badly positioned or
crystallised
POSSIBLE SOLUTION
- Add oil to the fork until it reaches a sufficient level
- Drain fork oil and fill up with suitably viscous oil
- Change the front fork. Contact an officially registered
mechanic.
- Adjust the rear shock absorber
- Adjust chain
- Change chain, rear crown and secondary transmission pinion
- Change rear crown
- Lubricate chain
- Align rear wheel. Contact an officially registered mechanic.
- Add oil to the fork until it reaches a sufficient level.
- Replace front fork spring
- Replace brake disc
- Change position of break pads or replace them.