Whirlpool WB1332A Manual De Uso Y Manejo página 15

Before calling a technician
IT IS THE USER'S RESPONSIBILITY TO VERIFY THE FOLLOWING INFORMATION BEFORE CALLING A TECHNICIAN.
If you followed the instructions in the installation, use and care guide correctly and have questions about the refrigerator's operation,
this guide offers solutions to problems you can detect and correct at home.
• Plug it in directly and properly, WITHOUT USING EXTENSION CORDS.
•
Check the ELECTRICAL CONTACT, WHICH COULD BE DAMAGED. Plug in another appliance to test whether it works.
• Avoid operating several appliances at the same time, AS THE ELECTRICAL INSTALLATION MAY BECOME OVERLOADED.
• Make sure that the TEMPERATURE CONTROL IS IN THE ON POSITION.
• Make sure the refrigerator IS NOT CLOSE TO A HEAT SOURCE SUCH as an oven, stove or direct sunlight.
•
THE DOORS SHOULD CLOSE HERMETICALLY. Check the magnetic lining on the doors.
• LEVEL THE REFRIGERATOR. Remove the wooden bases and adjust the leveling screws (FIGURE 1).
• DO NOT OVERLOAD THE REFRIGERATOR, as the cold air circulation might be insufficient.
• Set the TEMPERATURE CONTROL KNOB TO MED (medium cold) and wait for at least 24 hours before changing the
temperature again.
• Check that the CONDENSER IS FREE OF DUST AND LINT (FIGURE 1).
• AVOID OPENING THE DOOR CONTINUOUSLY or for long periods of time.
•
DO NOT PUT HOT FOOD INTO THE REFRIGERATOR and keep food covered.
• Check WHETHER THERE ARE OBJECTS ON OR BEHIND THE REFRIGERATOR.
• IF THE COMPRESSOR IS NOT WORKING CORRECTLY, the voltage may be low. Check the intensity of the light. If it is low,
that indicates low voltage. Ask your power company to correct the power supply (FIGURE 1).
01-Oct-2019 11:25:48 EDT | RELEASED
IF THE REFRIGERATOR DOES NOT WORK
IF YOU NOTICE THAT THE REFRIGERATOR WORKS FOR LONG PERIODS OF TIME
Explosion Hazard
Risk of re or explosion due to puncture of refrigerant
tubing.
Follow handling instructions carefully. Flammable
refrigerant used.
IF YOU HEAR STRANGE SOUNDS
In some European factories the letter "W" of the part code mentioned herein will be automatically
VERY IMPORTANT
DANGER
15
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")