Panasonic MK-F800 Instrucciones De Funcionamiento página 16

FOOD PROCESSOR
Operating with Manual Menu
1

After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3
Adjust the desired speed with the Rotary Dial. The more
bars are lighted, the higher the speed. Push the Stop/
Start or PULSE Switch to start the operation.
5
After the processing is completed, switch off the Power
Switch and unplug from the socket.
Note:
• Always ensure that the Knife Blade is inserted before adding ingredients into the Bowl.
• Do not exceed the stated amount of ingredients for kneading as abnormal vibration may occur.
• Do not insert hot ingredients into the Bowl for processing. Always ensure that the ingredients are sufficiently
cooled before inserting, e.g. boiled potato.
• For Juice Make, fill in the solid ingredients first into the Bowl, followed by the liquid ingredients until the total
volume does not exceed 1,500 mL.
• Depending on the speed and amount of ingredients used, there will be significant vibrations present. In that
case, hold down on the Bowl Lid to support it during its operation.
• For kneading, do not reprocess after the dough has formed the first time.
• When process the liquid ingredients together with ice cubes, put the ice cubes not more than 10 pcs (approx.
170 g).
GB16
100_160419_MK-F800_Second_EU(UZ50E153).indb
-KNIFE BLADE-



16
2
Select the Continuous or Intermittent mode. The
selected Mode Indication L.E.D. will light up and a beep
sound will be heard. The Speed, Stop/Start Switch and
PULSE Switch Indication L.E.D. will light up and blink.
4
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. The speed can be adjusted during
operation. Push the Stop/Start Switch to stop the driving
operation.
6
Remove the Knife Blade from the Bowl before removing
the processed ingredients.
2016/04/19 16:56:47