Getting Started - Teac SP-X2i Manual Del Usuario

The SP-X2i comes mounted with an adapter for iPod with color
display (40GB, 60GB), "60GB (color) + Photo 40GB/60GB". To
play your iPod through the SP-X2i, you have first to check if the
factory mounted adapter fits your model of iPod. If it does not,
you have to replace it with a correct one, as explained below.
1. Remove the adapter from the Dock.
Hold the left and right sides of the adapter and gently pull it
up.
2. Choose the Dock adapter that fits your iPod mobile
digital device.
"Video 30GB" for iPod with video (30 GB).
"Video 60GB/80GB" for iPod with video (60 GB, 80 GB).
"nano" for iPod nano.
"mini" for iPod mini.
"20GB (color) + Photo 30GB" for iPod with color display
(20GB, 30GB, U2 Special Edition).
"60GB (color) + Photo 40GB/60GB" for iPod with color
display (40GB, 60GB).
"20GB + U2" for iPod with Click Wheel (20 GB, U2 Special
Edition).
"40GB" for iPod with Click Wheel (40 GB).
< Use a commercially available adapter to play iPod with dock
connector (with four buttons under the display).
8

Getting started

3. Insert the adapter into the Dock.
Fit the front edge of the adapter into the Dock, and then
press the back edge of the adapter onto the Dock until a
slight "click" is heard indicating the adapter is inserted
correctly.
< When you need to remove the adapter, hold the left and
right sides of the adapter and gently pull it up.
< When you don't use the Dock, use the supplied cover for the
Dock to prevent dust from settling on the Dock.
Compatible iPod Software
In case your iPod will not work with the SP-X2i or with the
remote control unit, software update may solve the problem.
Visit the Apple website and download the latest iPod Software.
iPod is a trademark of Apple Computer, Inc., registered in the
U.S. and other countries.
1
2
Dock