Thulos TH-FN45 Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
Assemble the foundation and the other parts of the appliance in the following sequence:
1. Put spring in stand tube from the bottom of the tube, tighten stand tube to stand base with
screw A.
2. Unscrew the base screw by turning clockwise from the stand pole and put the base screw
through the base to the stand pole by turning counter clockwise. Then tighten the base and the
extension pole.
3. Put the base cover on the stand base. Pull the extension pole out then tighten with the out-
joint.
4. Place control box firmly on top of extension pole and tighten with screw B
5. Adjust the fan head to the up or down position and then tighten the fastening screw.
6. Use the fastening nut for the back grill to attach the back grill to the fan head, and then use
the fastening nut for the fan leaf to hold the fan leaf in place.
7. Attach the front grill to the back grill with the grill ring carefully to hold them together and
fasten the grill ring with the screw provided.