Operations; Talking Microphones Display; Conference Mode Settings - Opvimus EDC-1000 Manual De Instrucciones

4. OPERATIONS

4.1. Talking microphones display

•
When conference microphone is in use, its ring red LED will be on. At the same time, its
identification code will be displayed on the LCD screen of the main control unit.
•
Up to three microphones ID codes can be shown on the preset menu.
•
If more than three microphones are in use, "
part of the LCD screen. Pressing "Mode" button,
displayed. Press the "Up"▲ and "Down"▼ buttons to check the codes of used
microphones.

4.2. Conference mode settings

•
Press the "Mode" button to move the icon
will start blinking. Press up or down buttons to change the conference mode.
•
Conference modes are the following:
Normal: Delegates microphones can speak freely pressing "talk" button (within the limits of
opened microphones).
Chairman: Only chairman microphone can speak. Delegate microphones are disabled.
EDC-1000 Version 2
EDC-1000 SERIES
Conference System
" icon will be displayed on the up-right
icon next to the "NO:" option will be
to the position MODE. The word "Normal"
Page 9 of 16