Charging Instructions - Panacom SP-1518BT Manual Del Usuario

cHARGING INSTRucTIONS

This Bluetooth speaker comes with a built in rechargeable
battery. Before using it for the first time we recommend you
charge the battery fully. Only use the supplied USB cable to
charge the Bluetooth speaker.
1. Connect the USB cable to the USB port on the unit.
2. Connect the other end of the USB cable to a USB port on
a PC or an AC/DC adapter. The LED indicator turns on to
indicate that the battery is being charged. When the battery
is fully charged, the LED indicator will turn off.
PAIRING THE BluETOOTH SPEAkER wITH
BluETOOTH DEvIcES (PHONE OR muSIc DEvIcE)
1. Turn off the speaker. Make sure the speaker is power off
before going to the next step.
2. Press and hold the Power ON/OFF button until the red
LED light flashes, now the Bluetooth speaker is ready for
pairing.
3. Turn on your Bluetooth enabled device and activate the
Bluetooth function.
4. Search for the Bluetooth device, "SP-1518BT" will show up.
5. Pair your Bluetooth enabled device with SP-1518BT. If a
password is needed, type in "0000". After the SP-1518BT is
paired with your device, connect it to your device.
TIPS:
Once the speaker is paired and connected to your Blue-
tooth device, it automatically connect the next time as long
as the Bluetooth on your device is turned on.
Pg. 6
c
A
E
R
a
R
q
S
N
&