Efergy Energy monitoring socket Manual De Instrucciones

SINGLE TARIFF SET-UP
• Press and hold the cost button to enter set-up
• You will then see the currency symbol flashing
• Use up & down buttons to choose your currency. Press cost
• Use up & down buttons to choose TARIFF 1. Press cost
• Use up and down buttons to set the tariff cost
• Press the cost button to move on to the next digit
• Repeat the process until you have entered each digit
• Press cost once more to exit
DUAL TARIFF SET-UP
• Enter set-up as descibed above, but select DUAL TARIFF
• Use the up and down buttons to set tariff 1 start time
• Press the cost button to move on to the next digit
• Repeat the process to set tariff 2 start time. Press cost
• Again, use the same process to set tariff 1 & tariff 2 cost
• Press cost to exit after setting cost details for both tariffs
• Plug in the EMS product to start saving money and energy now
TIME SET-UP
• Press and hold up to enter set-up. Press energy to begin
• Use up and down to set each digit. Press energy to confirm
• Press cost to exit
HOW IT WORKS
The energy monitoring socket is a simple
plug-in device that sits between the appliance
and the wall socket. When you plug in an
appliance, the efergy energy monitoring socket
displays the consumption of that appliance in
watts and the cost per year. You can also view the
cost accumulated so far and the cost per day by
pressing the cost button.
INSTANT SAVINGS
The energy monitoring socket uses real time
data to help you become more aware of how
much electricity an appliance is using. With this
knowledge you can make more informed choices
about what, when and how to use the appliance
according to your energy saving objectives
CUMULATIVE DATA
The energy monitoring socket adds up your
energy data cumulatively so that you can see how
much energy you've used since the appliance
was switched on. Also you can check how long
the appliance has been running for by pressing
the up and down buttons.
DIFFERENT MODES
The energy monitoring socket is flexible in the
way you can view data. Press the cost button to
switch between cost settings, the energy button
to switch between energy settings, and you can
change the time setting by pressing the up
button (see the set-up instructions left).
www.efergy.com
MIDE
REDUCE
AHORRA
MANUAL DE INSTRUCCIONES