ClearSounds IL95 Manual De Instrucciones página 6

3 Release the "on-hook" switch or pick up the handset and listen for a dial tone.
4 Continue this process until you hear a dial tone and the microphone is
functional. Once you have located the proper setting, make a note of it
in the event it is changed accidentally or you use your IL95 on a different
phone.
NOTE: The IL95 cannot be used on any telephone where the keypad is located in the
handset.
If, after installing your IL95 Amplifier, you do not have a dial tone or the person you called
cannot hear you, take the following steps:
1 Check that all connections are plugged in properly
2 Make sure power is connected
3 Either disconnect the unit or use another phone and check that your phone
service is working properly.
4 Change the compatibility setting dial located on the bottom of the unit.
Troubleshooting
6 – ENGLISH