Nevir NVR-810BRD Manual De Instrucciones página 13

Operation
Bluetooth connection
1. start-up
Turn on the power toggle switch and the stand-by , the LED indicator in blue flash
quickly, it is ready for Bluetooth connection.
2. activate the Bluetooth of the equipment to be connected
3. Search for this Bluetooth soudbox
Enter the "Bluetooth setting" and carry out the "scan the Bluetooth device"
command. After being scanned, names of "NVR-810BRD"will be listed.
4. Match and confirm the connection
choose the "NVR-810BRD" Bluetooth device and it will be automatically matched
in the next several seconds. The soundbox will release a short sound tip. It indicates
that bluetooth has been connected successfully. generally it takes only several
seconds to complete the Bluetooth connection ,and maybe longer time according
to the different bluetooth technology (some devices might require to feed matching
digits like "1234" or "0000" before connecting successfully )
5. Bluetooth automatical re-connection
after the renewal startup it will automatically search for and connect the Bluetooth
device connected last time. Please put these two Bluetooth devices at the
mutually-discernable distance . if the re-connection fails, the indicator in blue will
flash quickly, and it will search for the Bluetooth device again .
6. bluetooth Disconnection
press play/pause/Bluetooth-match button for a few of seconds , the Bluetooth will
be disconnected , then the Bluetooth indicator will flash quickly , entering the
status of Bluetooth-searching .
Play back the audio file at the Bluetooth connection mode
1. press the play/pause quickly to play or pause, the blue light is on when play and
flash when pause.
2. Volume down /previous audio track : press this button quickly to go backward to
the previous audio track, press it for a few of seconds, volume down.
3. Volume up /next audio track : press this button quickly to go forward to the next
audio track, press it for a few of seconds, volume up.
Answer calls ( only after the Bluetooth is successfully connected to
phone)
1. Make calls
Press handsfree button for a few of seconds to call back the last call, and the music
will be paused if it is being played.
4