Wear Parts - Buchi I-300 Pro Manual De Instrucciones

BÜCHI Labortechnik AG
11.2.2
Manual de instrucciones Interface I-300 Pro
Holder. For rod, inc. support, fixing clamp
To fasten interface on lab-stand.
Holder. Wall mount, inc. support set
To fasten Interface on wall.
Level sensor. Inc. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of condenser/secondary
condenser. Placed on receiving flask. Meant to be used with the Inter-
face I-300/I-300 Pro.
Power adapter. 30V, 30W, frequency 50/60Hz
To power vacuum controller/interface.
SD-card. For Interface I-300 Pro, 1GB
For recording of all process parameters. Data can be exported for
further analysis.
Vacuum valve. Magnetic valve, 24V/4W, Mini-DIN, 1.5m
Flow valve without flask, meant to be used with a centralized vacuum
source or an unregulated vacuum pump. Meant to be used with the In-
terface I-300/I-300 Pro.
Vapor temperature sensor. Inc. cap nut, seal GL14
Measures the vapor temperature inside the system. Meant to be used
with the Interface I-300/I-300 Pro.
Valve unit. Inc. Woulff bottle, 125mL, P+G, holder
Magnetic valve. Meant to be used with the Interface I-300/I-300 Pro.
For operation with non-BUCHI vacuum pumps or house vacuum.
Water jet pump, B-764. Magnetic valve, FFKM, 24V
Used when tap water is used to generate vacuum. Not inclusive: Coo-
ling water valve. Meant to be used with vacuum Controller V-850/
V-855/interface I-300/I-300 Pro.
Water jet pump, B-767. Magnetic valve (2 off), FFKM, 24V
Meant to be used when tap water is used to generate vacuum. Inclusi-
ve: Cooling water valve. Can be used in combination with a vacuum
controller/control unit.
Woulff bottle. 125mL, P+G, inc. holder
For trapping particles and droplets and for pressure equalization.

Wear parts

Hose barbs
Bent, GL14, inc. silicone seal
Set. . 2pcs, bent (1), straight (1), GL14, silicone seal
Content: Hose barbs, cap nuts, seals.
Set. 4pcs, bent GL14, silicone seal
Content: Hose barbs, cap nuts, seals.
Set. 4pcs, straight, GL14, silicone seal
Content: Hose barbs, seals.
Further wear parts
Cap nuts, set. 10pcs, screw cap with hole GL14, seal EPDM
Content: Hose barbs, cap nuts, seals.
Seal. For cap nut GL14 to FEP, EPDM
Anexo | 11
11059021
11059132
11060954
11060669
11061548
11060706
11060707
11061887
031358
031357
11059905
018916
041939
037287
037642
041999
038225
129/134