Publicidad
Idiomas disponibles
Idiomas disponibles
- Place the base on the floor.
- Join the two plastic tubes by screwing
them together and fit this long unit to the
base.
- Place the screw collar loosely onto the
upper plastic tube.
- Insert the metal tube into the upper
plastic tube until the desired overall
height has been reached. The metal tube
must project into the plastic tube by at
least 10 - 15 cm. Tighten the collar to
hold the tubes together by turning it
clockwise.
- Check carefully that all connections are
secure.
- Slide the drying hood with its bracket
onto the metal tube.
- The transparent visor can be flipped up
at the front.
Switch positions
The drying hood is controlled via a switch in
the power cord:
Settings: 0 – 1 – 2 – 3 – 0
0 = Off
1 = Warm air (gentle)
2 = Warm air (medium)
3 = Hot air
Thermal safety cut-out
The built-in thermal safety cut-out
automatically switches the unit off in case of
overheating. Remove the plug from the wall
socket and allow for a sufficient cooling
down period before switching it on again.
General care and cleaning
●
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has completely cooled down.
●
To avoid the risk of electric shock, do not
clean the appliance with water and do
not immerse it in water.
●
Do not use abrasives or harsh cleaning
solutions.
- If necessary, the housing may be wiped
with a dry lint-free cloth.
- All parts of the stand assembly may also
be cleaned this way.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of
two years from the date of purchase. Under
this guarantee the manufacturer undertakes
to repair or replace any parts found to be
defective, providing the product is returned
to one of our authorised service centres. This
guarantee is only valid if the appliance has
been used in accordance with the
instructions, and provided that it has not
been modified, repaired or interfered with
by any unauthorised person, or damaged
through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as glass
and ceramic items, bulbs etc. If the product
fails to operate and needs to be returned,
pack it carefully, enclosing your name and
address and the reason for return. If within
the guarantee period, please also provide the
guarantee card and proof of purchase.
8
Publicidad
