Steren RMX-400 Manual De Instrucciones página 2

HDMI remote control extender
0817A
CAUTIONS
Before using your new Steren product, read this instruction manual to avoid any
malfunction.
The information shown in this manual is for product reference only. Due to updates
there may be differences. Please see our website www.steren.com.mx
To obtain the most recent version of the instruction.
IMPORTANT
• Do not expose the product to extreme temperatures.
• Always wipe with a clean, dry cloth.
• Ensure that the weight of the cable does not fall on the connector, as this may
cause damage to your equipment. If supported, attach the cable to this or the wall
to prevent damage
CONNECTION
TV
HDMI cable max 20 m
Place both modules in IR mode as shown in the image
NOTE:
Make sure the transmitter points directly to the equipment you want to control
You need to connect the HDMI cable without using amplifiers, power cords or
HDMI accessories for optimum operation.
In case the distance you want to connect is greater than 20 meters use extensors
so that it can work properly.
SPECIFICATIONS
Carrier Frequency: Dual Band (30 kHz - 60 kHz)
Sensor receiving distance: up to 12 m
Maximum current: 15 mA
IN
IN
Instruction manual
DVD
Transmitter
IN
Remote control
of DVD
TV
IN
Receiver
CEC IR
RMX-400
V0.0