Power Supply Section - ADVANCED NATIVE TECHNOLOGIES B-TWIG 12 PRO Manual De Uso

13 RECESSED SIDE HANDLES
SUBWOOFER
Use these handles for transporting and
positioning the subwoofer. Do not use them to
fly the subwoofer or to lock it in any position.
14 RECESSED REAR HANDLES
COLUMNS / SUPPORT ELEMENT
Use these handles for transporting and
positioning the elements. Do not use them to
fly the speakers on the wall, on the ceiling or
to lock the columns in any position.
B-TWIG 12 PRO
12 User manual |
13
14
3.3 | POWER SUPPLY
1
3
2
1 MAINS INPUT
IEC mains socket with integrated EMI filter. Each package is supplied
with the necessary power cord, specific for your area. Insert the mains
cable into this socket, but make sure the system is switched off before
connecting the cable to the mains. For your safety, never disconnect
the ground lead.
WARNING!
Never remove the front protection grille of the cabinet. To prevent the
risk of electric shock, in case of accidental damage or replacement of the
protection grille (to be carried out by service centers only), immediately
disconnect the power supply.
CAUTION: To reduce the risk of electric shock, never connect the power
supply to the appliance while the grille is removed.
2 FUSE
Protection fuse integrated in mains socket.
CAUTION: Replace the fuse only with one of the same type and with
the same value. If the fuse blows repeatedly, contact an authorized
service center.
3 POWER ON/OFF
Use this switch to turn ON/OFF the system.
B-TWIG 12 PRO
13
| User manual