Checking The Tracker And Product Contents - Crane AU6-CDAT-6A Manual Del Usuario

USA

Checking the tracker and product contents

− Do not place any objects on the tracker and do not apply pressure to the
display.
NOTICE!
Avoid strong magnetic fields (e.g. transformers). Otherwise, this may cause
fluctuations in the transmission of the data measured.
Checking the tracker and product contents
1. Take the tracker out of the packaging.
2. Remove the protective foil from the display
3. Check to make sure that the delivery is complete (see fig. A).
the individual parts exhibit
4. Check whether
use the tracker. Contact the manufacturer at the service address specified on the
warranty card.
18
1800 493 9137
USA
.
3
damages. If this is the case, do not
service@cranesportsconnect.com AFTER SALES SUPPORT