Storing The Pressure Washer - Baja MB801700 Manual Del Operador

STORING THE PRESSURE WASHER

See Figures 21 - 22.
NOTE: Regular use of pump protector will give you
better performance of the unit and increase the life of
the pump.
Store in a dry, covered area where the weather can't dam-
age it.
It is important to store this product in a frost-free area.
Always empty water from all hoses, the pump, and the soap
tank before storing.
 Make sure the on/off switch is in the OFF position (O).
 Disconnect both the high pressure hose and the garden
hose from the pump.
 Tilt the unit as shown to allow any remaining water in the
pump to drain from the water inlet.
MAINTENANCE
NOTICE:
If the location where your pressure washer is stored will
fall below 32°F, the use of a pump protector is required
before storing to prevent freeze damage. Freeze damage
will void your warranty.
 Secure the high pressure hose to the hose reel.
 Store the unit and accessories in an area that does not
reach freezing temperatures. Do not store near furnace
or other sources of heat that could dry out the pump
seals.
Page 16 — English