Parts Description - Akiyama HARMONIC Manual De Usuario

PARTS DESCRIPTION

3
2
12
11
10
9
COMPONENTS
1
AC power cord
2
Turntable platter
3
Dust cover
4
RCA output jack
5
Platter mat
6
Tonearm
7
Cartridge
8
SIZE select (30/17)
9
Arm-elevation button ( UP/ DOWN)
Press the button and the tone arm raises.
6
7
8
AC
14 13 1
Without pressing the button the tone arm remains
in its stand by position.
10
STOP button
11
START button
12
SPEED button ( 33/ 45)
Press button for 45 rpm. Depress button for 33
rpm.
13
USB socket (USB cable limit within 3M)
14
Phono/line switch
5
1
4
ASSEMBLY
1
Carefully place the platter on the center spindle, and align one of its openings over the motor pully
position (Fig.1).
2
Tear the fiber tape off.
3
While holding both ends of the ribbon on the turntable belt, carefully pull the belt over the motor
pully (Fig.2). Be sure it does not twist.
4
Remove the ribbon.
5
Once the belt is seated in the pulley's groove, as Fig.2, the fiber tape can be torn off.
6 Remove another one ribbon (Fig.3).
ASSEMBLY
3
2
2