Package Contents; Device Installation; Device Operation - LEGRAND C2G 29329 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
W
A/V
IRELESS
FOR
P
C
ACKAGE
ONTENTS
Transmitter unit
Receiver unit
2 x DC 5V/1A universal power adapters
USB power cable
D
I
EVICE
NSTALLATION
Note:
Prior to installation ensure that all devices are powered off.
To ensure proper air circulation, do not cover the Transmitter or Receiver unit with any objects.
The maximum range of 100ft can be obtained with direct line-of-sight from the Transmitter to the Receiver unit. Distance will be shortened by
obstacles or walls between the Transmitter and Receiver unit.
Step 1: From an HDMI source device, connect an HDMI cable to the HDMI IN port of the Transmitter unit.
Step 2: Connect HDMI cables to the HDMI OUT port of the Receiver unit, then connect the other end of the HDMI cable to display device.
Step 3: Connect the provided DC 5V/1A power adapter to the USB Micro-B port of the Transmitter unit. Then plug the DC 5V/1A power adapter into an
available power outlet.
Step 4: Connect the USB Micro-B end of the DC 5V/1A power adapter, that is provided, to the power port of the Receiver unit. Then plug the DC 5V/1A
power adapter into an available power outlet.
Step 5: Once all connections have been made and power has been established to all devices, the Transmitter and the Receiver unit will begin to
automatically pair. Allow up to 2 minutes for devices to pair. Do not touch or press "PAIRING" button during the pairing process, as this will cause the
device to not function properly.
D
O
EVICE
PERATION
Note:
Do not attempt to access the device's IP address, as this will cause the device to not function properly.
The Transmitter and Receiver units come paired together. Allow up to 2 minutes for devices to pair. However if re-paring becomes necessary
please follow the steps below.
Step 1: First Press "PAIRING" key on the receiver unit. You will see message "Connecting Please Wait" displayed on screen.
Step 2: And then Press "PAIRING" key on the transmitter unit for a second, and wait for auto connection.
HDMI D
U
EVICES
2 x HDMI cables
Double sided tape
User Manual
M
SER
ANUAL
2
(
)
US

Publicidad

Tabla de contenido
loading

Tabla de contenido