Scheduling Cleaning; Cleaning Modes - Princess 01.338902.01.001 Manual De Usuario

Instruction manual
Note: if robot is in sleep mode, press CLEAN button to wake the robot
up from sleep mode. Then press CLEAN for a second time, the robot
starts cleaning automatically.
2. Pause
To stop the robot temporarily from cleaning:
A. Press CLEAN button on main body;
B. Or press ON/OFF button on remote controller.
3. Sleep mode
Turn robot into sleep mode, and its display indicator will be off
(robot in standby, not powered off);
A. The robot will automatically turn to sleep mode if no command
received in 30 seconds.
B. Press CLEAN button on the main body for two seconds or press
ON/OFF on remote controller for two seconds, robot will turn to sleep
mode.
NOTE: if the robot is not in use for a long time, please turn the power
switch off.

Scheduling cleaning

You can schedule the robot to make it start cleaning at a certain time.
(Time delay up to 24 hours)
Note:
A. The robot will always work at the scheduled time after scheduling
confirmed.
B. All scheduling will be canceled if the robot is turned off.
C. When the cleaner is charging directly by adapter instead of
charging it will not accept scheduling set up.
How to Schedule the robot by remote controller:
8
A. To schedule the robot when it is standby or charging on the
charging station. (Press CLEAN to wake up the robot, or press ON/
OFF to wake it up.)
B. Press PLAN button until the remote displays flashed figure "00:00".
C. Press up and down direction buttons to set the flashing numbers.
D. Press the left and right direction buttons to switch between hour
and minute.
E. After time is confirmed, press ON/OFF to save scheduled setting –
robot will have one beep, and the CLEAN button indicator will be in
pink for two seconds – robot is successfully scheduled.
F. Press ON/OFF again, scheduled setting will be canceled, robot will
have two beeps and the CLEAN button indicator on the robot will be
blue.
G. Press PLAN button for seconds, it will get back from scheduling
setting.
H. User can press PLAN button to check whether robot has already
scheduled, if yes, robot CLEAN button indicator will be in pink for two
seconds. Otherwise, the indicator will have no color change but robot
beeps once.

Cleaning modes

Mode 1: Spiral cleaning
The robot will clean the room automatically in a spiral way and adjust
its cleaning mode according to environment.
To start the auto mode press ON/OFF button on remote control or
press CLEAN on main unit.