Sony HVL-F32X Manual De Instrucciones página 13

3
When using the digital still camera without the accessory
shoe
* Use the supplied connection cord.
* Use the supplied shoe adaptor.
1
• To use the supplied shoe adaptor, attach the shoe adaptor to the tripod
screw hole of the digital still camera.
1 Turn in the direction of the arrow to tighten.
• Attach this unit to the shoe adaptor.
2 With the flashing section facing forward, securely attach it to the shoe
adaptor.
The accessory shoe can rotate.
3 Attach the connection cord to the connection cord terminal of this
unit.
4 Turn the rotating knob in the direction of the arrow to tighten.
PNote
Removing or attaching this unit to a digital still camera while the power is ON,
or disconnecting the connection cord while the power is ON can cause the flash
to fire erroneously.
2
3
13-GB