ERSA i-con nano Instrucciones De Uso página 8

01 Adjust mains voltage in ac-
cordance with type plate.
02 Set up soldering station
and stand in a dry place.
03 Check for correct fit of
soldering tip.
04 Place soldering iron into
holder stand.
05 Insert plug into socket.
06 Switch on soldering station.
ATTENTION! Soldering
tip is hot! Risk of burning
yourself!
07 Soldering station heats up
to the default value.
08 Press top key to increase
temperature, press bottom
key to decrease tempera-
ture.
09 Digital display shows ac-
tual value (A) and default
value (B).
10 Solder when the set
temperature has been
reached.
11 Place soldering iron only
onto holder stand.
12 After work or during pro-
longed breaks, switch off
appliance and remove plug.
8
| English
Commissioning
Read user manual carefully
and keep in a safe place for
future use.
Check contents of package to
ensure that no components
are missing. Contact dealer if
a component is missing.
Scope of delivery:
1x i-CON nano soldering
station
1x i-Tool nano soldering iron
1x soldering tip (fitted)
1x holder stand
1x user manual
1x set of safety instructions
Soldering
The soldering station is de-
signed for tin-lead soldering
at various temperatures. Af-
ter appliance is switched on,
the soldering tip is heated
up automatically to the most
recently set temperature.
The soldering results depend
on how suitable the soldering
tip is to the job. When solder-
ing large-size jobs, our more
powerful i-CON1 and i-CON2
soldering stations should be
used.
Default value: 360 °C / 680 °F
Value range: 150 to 450 °C
300 to 842 °F
Attention!
Danger spot
Hot surface!
Risk of burning
yourself!