Storage And Transport; Reception And Check Of Contents; Packing - FPZ SCL R20-MD GOR ATEX Manual De Instrucciones

Rigid connection between the machine
and system
Using the unit with current
exceeding the motor rating
IMPROPER USE LINKED TO MAINTENANCE WORK
Failure to clean the filter
Failure to eliminate of layers of surface
dust
Failure to check the condition of parts
subject to wear (seals, flexible couplings,
etc.) where foreseen.
FAULT CONDITIONS / EMERGENCY CONDITIONS
Not stopping the machine when making an
abnormal noise.
Failure to refit the protection devices
(coupling covers, blind flanges) where
foreseen.

11 STORAGE AND TRANSPORT

11.1 RECEPTION AND CHECK OF CONTENTS


Upon receipt of the unit, check that the packaging is intact and without signs of damage
due to transport or storage conditions.

If the packaging is damaged, immediately notify the forwarder and the manufacturer.

Always check that the material received matches that specified in the consignment note.
11.2

PACKING

Depending on its size and weight, the unit is packed in the following ways:

in a single box;

on wooden platform with cardboard covering;

in a wooden crate;
The wood of the platforms, pallets and crates can be reused or recycled in accordance with the current
laws in the country where the unit is installed. Other materials, such as cardboard, plastic or protective film,
must be disposed of in accordance with local regulations.
FPZ-MI-R-MD-MOR-GOR-ATEX-15-R00
Abnormal vibrations for the machine
and/or system with possible seizing of the
impeller.
values Possible overheating of the machine and
motor
Seizing of the impeller
Machine overheating
Machine performance different from the
data given.
Damage with possible seizing of the
impeller, machine
possible motor damage.
Operator coming into contact with moving
parts.
38 / 111
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
overheating and AND OPERATORS
RISK FOR THE OPERATOR