Adjusting The Sound; Adjusting The Picture - Denon Professional DN-500BD MKII Guia Del Usuario

Adjusting the Sound

Important: If the Vol –/+ and Mute buttons do not work, set the Output Volume to Variable instead of
Fixed (see Adjusting the Settings > Setting > Audio Setup
To adjust the volume, use the Vol –/+ buttons on the remote control. Alternatively, use the volume
adjustment controls on your TV, your TV's remote control, your audio receiver or amplifier, etc.
Important: These buttons control the output level of the audio outputs and 7.1 outputs only. If you are
not using those outputs, use the volume control on your TV, your TV's remote control, your audio receiver
or amplifier, etc.
To mute/unmute the audio, press Mute ( ) on the remote control.
Important: This button mutes/unmutes the audio outputs and 7.1 outputs only. If you are not using
those outputs, use the mute button your TV's remote control, your audio receiver or amplifier, etc.
To change the audio setting, press Audio on the remote control. The current audio setting will appear in
the upper-left corner of the screen. Each press after that will select the next available setting. The available
settings depend on the supported audio configurations of your video. For example, a video file may let you
select Stereo, Mono, Left, or Right, while a Blu-ray Disc may let you select DTS-HD MA (Master Audio)
or Dolby Digital in various languages. This feature is available during video playback only.
Alternatively, change the audio setting in the Options menu. See
learn how to do this.
To select the language of the audio used with the Picture-in-Picture feature, press 2nd Audio on the
remote control. (Picture-in-Picture feature lets you view additional content in a small screen within the
normal screen during playback. This feature is available only on discs that support it.)
Alternatively, enable/disable this feature in the Options menu. See
BDMV Options to learn how to do this.

Adjusting the Picture

To change the picture resolution, press HDMI on the remote control. Each press will select the next
available resolution: Auto (DN-500BD MKII will detect the optimal resolution automatically), 480i/576i,
480p/576p, 720p, 1080i, or 1080p.
Alternatively, change the resolution in the Setting menu. See
To enable/disable the Picture-in-Picture feature, press PIP on the remote control. This feature lets you
view additional content in a small screen within the normal screen during playback. This feature is
available only on discs that support it.
Alternatively, enable/disable this feature in the Options menu. See
learn how to do this.
Tip: You can enable/disable the PIP Mark feature to indicate that there is secondary video you can view
using the Picture-in-Picture feature. See
how to do this.
To change the zoom distance, press Zoom on the remote control. Each press will select the next
available zoom distance: 2x, 3x, 4x, 1/2, 1/3, and 1/4. When no zoom distance is shown on the screen, the
picture is at its normal zoom distance.
To change the camera angle, press Angle on the remote control to select the desired angle. This feature
is available only on certain DVD or Blu-ray Discs.
Alternatively, enable/disable this feature in the Options menu. See
learn how to do this.
20
to learn how to do this).
Adjusting the Settings
Adjusting the Settings > Setting > Playback Setup
Adjusting the Settings > Options
Adjusting the Settings > Options >
to learn how to do this.
Adjusting the Settings > Options
Adjusting the Settings > Options
to
to
to learn
to