Denon Professional Commander Sport Guía De Usuario página 5

Setup
Items not listed under
Wired
Microphone
Operation
Wireless Microphone Setup
To use the included wireless microphone, follow these setup steps:
1. Ensure new batteries are installed in the wireless microphone.
2. Pair the wireless microphone to the wireless receiver on Commander Sport.
a. Turn on Commander Sport.
b. Turn the Browse knob to cycle through the options and press the knob to select W. Mic on
the display screen.
c. Turn on the wireless microphone.
d. Select a channel with the best reception using the Up/Down buttons on the Commander
Sport receiver.
e. Lift the cover from the compartment and place the wireless microphone IR sensor near the
receiver's IR LED. Press the Set button on the receiver. Wait for about 3 seconds until the IR
LED stops flashing. When it finds an interference-free channel, the RF LED will illuminate on
the receiver to show that the wireless microphone is matched to that channel.
3. Adjust the microphone gain using the W. Mic knob on Commander Sport.
Introduction > Box Contents
Media
Player
Tablet
Front Panel
are sold separately.
Wireless
Microphone
Rear Panel
Power
5