Denon Professional Commander Sport Guía De Usuario página 6

Playing Music from a USB Flash Drive
1. Connect your USB flash drive to the USB Playback port.
2. Press and release the Mode button until the USB device appears on the display screen.
3. Press the Browse knob and cycle through the options to select "Folder" or "Track". Press the
knob to confirm the selection and turn the knob to choose the specific folder name or track
name. Press the knob to select the folder or track.
4. Use the |<< and >>| buttons to scroll through your files and press Play to start playing the
selected file.
Playing Music from a SD Card
1. Insert an SD card into the card slot.
2. Press and release the Mode button until the SD card option appears on the display screen.
3. Press the Browse knob and cycle through the options to select "Folder" or "Track". Press the
knob to confirm the selection and turn the knob to choose the specific folder name or track
name. Press the knob to select the folder or track.
4. Use the |<< and >>| buttons to scroll through the files and press Play to start playing the
selected file.
Playing Music from the Aux Input
1. Connect your media device's output to the aux input on Commander Sport.
2. Turn the Browse knob to cycle through the options and press the knob to select Aux on the
display screen.
3. Play your music device and adjust the source volume if needed.
Pairing a Bluetooth Device
1. Power on Commander Sport.
2. Use the Mode button to select Bluetooth as the source.
3. Power on your Bluetooth device.
4. Navigate to your Bluetooth device's setup screen, find "Commander Sport" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth button.
To connect to another Bluetooth device, repeat step 3.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Commander Sport:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On.
3. Power on Commander Sport.
4. Press and release the Bluetooth button on Commander Sport.
5. Touch and briefly hold your device to the top panel NFC logo.
6. Follow the pairing instructions that appear on your phone. If a passcode is required, enter '0000'.
Note: Use the Mode button to select Bluetooth as the source.
To unpair, gently bump your device against the NFC logo located on top of Commander Sport.
6