2. Introduction
Thank you using our LED laser series products. This fixture
is the latest new LED laser product.The product housing
used Aluminum plastic material, beautiful appearance,
with international advanced electronic control technol-
ogy and excellent industrial design. Product e ect more
rich, colorful, and color is gorgeous because of installed
high output light source.
•
This product applications widely, installation
simple. Can widely used for small parties, home
parties, small clubs, small stages and so on.
What's inside
•
•
1 light
•
User Manual
•
Power Cable
Caution
1.
Before delivery, this device has passed strict in-
spection, Please follow the user manual strictly
for operation, if this fixture is damaged by im-
proper operation and mistake, the fixture will be
out of warranty, and manufacture or dealer won't
be responsible for it. In case of any technology
change in this manual,we won't advise in further .
2.
A er you have received this product, please pay
special attention and check cautiously whether
the product was damaged or not during the
transportation, if it is, please do not use this fix-
ture and contact local dealers or manufacturers
as soon as possible.
3.
The applicable temperature for the lighting is be-
low 40°C. Do not use the lighting above the temp
erature.
4.
It must be kept clean; please do not use it around
overheat or dusty environment. Do not touch the
Chemical liquid.
5.
Read the instructions before installing anything.
Pay attention to the manual and warning signs
on the equipment, if you have any other ques-
tions, please contact the dealer or manufacturer
as soon as possible.
6.
Any break, please contact professionals: repairs
must be done by technical personnel.
7.
Do not power in and open before installation. Let
have a rest when continuous work for eight hours.
It will longer the device using li .
8.
Fixed installation, to prevent the strong vibration
or impact of the device.
9.
The distance between the device and the projec-
tile must be at least 0.5 meter.
10.
Never look directly into the light source, as sen-
sitive persons may su er an epileptic shock (espe-
cially meant for epileptics)! When light output
position of the device of dustproof glass break-
age, cracks or other visible damage, user should
replace the new glass to continue to use.
Installation Instructions
1.
When install this equipment please make sure
there's no flammable surfaces (decorated things,
etc) and minimum distance of 0.5M from the
equipment to the flammable.
2.
The installation of the e ect has to be built and
constructed in a way that it can hold 10 times the
weight and without any harming deformation.
3.
The installation must always be secured with a
secondary safety attachment, e.g. an appropriate
safety rope. Never stand directly below the device
when mounting, removing or servicing.
P. 3
POWERBOX
ENGLISH VERSION