Dmx Address Setting - PowerBox Manual De Usuario

-
14 channel example
DMX IN
First one add 001

8. DMX address setting

Each fixture must set a specific starting address. When re-
ceiving signal, fixture will receive channel control signals
of this address from the DMX controller.
- For easy to use, the user can set the same address
for several fixtures , also can set up a unique ad
dress for every device.
- If you set the same address for all fixtures, all the
fixtures will receive from the same DMX channels
signal. All connecting fixtures are jointly con-
trolled, controller can't separately control a devic
- If you set a di erent address for each fixture, each
fixture will receive unique signal and can be con-
trolled by DMX controller separately.
- This fixture has 14 channels.you should set the
starting address of the first unit to 1, the second
unit to 15(1*14 + 1), the third unit to 29(2*14+ 1),
and so on.
9. Installation
When install this equipment please make sure there's no
flammable surfaces (decorated things, etc) within at least
2.5M and maintain minimum distance of 0.5M from the
equipment to the walls. Please make sure that there's no
other equipment or decorating materials obstructed the
exhaust fan and the vent-pipe. Products should be install
immobility.
P. 8
POWERBOX
ENGLISH VERSION
Second one add 015
DMX OUT
Third one add 029
Clamp
Handle