BOWY SCOOTER 5 Manual De Usuario página 32

ENGLISH
9 CHARGING YOUR SCOOTER
Step 1: Ensure that the charging port is clean and dry.
Step 2: Plug the charger into the power socket, then connect the cable with the power supply (100V~240V; 50,60Hz), make sure
the light on the charger is lit GREEN.
Step 3: Male DC connector plug into the charging port ofthe scooter. The indicator light on the charger should change to RED,
indicating that your scooter is now, being charged. When the RED indicator light on your charger turns to GREEN then your
scooter is fully charged. A full charge typically occurs within 3 hours.
Step 4: Please unplug the charger from your scooter and from the power outlet.
IMPORTANT NOTES ABOUT CHARGING
If the green light on your charger does not turn RED when you plug it tinto your scooter, it could mean you have to check the
cables to ensure you have a proper connection; or that your scooter is already fully chaged. Push and hold your power button
next to the charging port to check the status of your battery in the display.
• Do not overcharge, as this will affect the life of the battery.
• The best charging temperatures are between 0°~40°. Extreme cold and
extreme heat will prevent your battery from charging fully.
• Make sure to unplug your charger before standing on or operating you
scooter, as this can be very dangerous.
• Use only the scooter charger that you received in your box.
• If the scooter is powered on when you enter the plug, the Battery Indicator will
begin blinking, if the scooter is powered off when you enter the plug, the Battery Indicator will not blink.
NOTE Only the indicator light on the charger will tell you the status of the battery during charging.