Craftsman 580.752020 Instrucciones De Uso página 6

Your p ressure washer requires some assembly butisquickly
ready f oruse. I fyouhave anyproblems withtheassembly of
yourpressure washer, please c all t hepressure washer
helpline at(800} 2 22-3136.
Tools
Heeded
• #2 Phillips screwdriver
AssembleHandle
1. Place handle on top of pressure washer.
UnpackPressure Washer
1. Removeeverything from carton except pressure
washer.
2. If pressure washer is too heavy for you to lift, open
carton completely by cutting each corner from top to
bottom.
Carton Contents
Check all contents. If any parts are missing or damaged, call
the pressure washer helpline at 1-800-222-3136.
• Pressure washer
• Pressure washer handle
• Spray gun preattachedto high pressure hose and hose
reel.
• Nozzleextension with adjustable nozzle
• Nozzleextension with turbo nozzle
• Parts bag (which includes the following):
• Operator's manual
• Owner's registration card
• Safety goggles
• Spray gun holders (2)
• Garden hose quick connect coupling (female and
male)
• Nozzlecleaning tool
• Handle attachment screws (4)
Become familiar with each component before assembling the
pressure washer Identify contents with the illustration
shown in Featuresand Controls. If any parts are missing or
damaged, call the pressure washer helpline at
(800) 222-3136.
AssemblingPressure Washer
Your Craftsman pressure washer will need assembly before
operation:
• Fill out and send in registration card
• Assemble handle
• Attach spray gun holders
• Attach quick connect coupler to water inlet
2. Using supplied screws, attach handle to pressure
washer with phillips screwdriver. Tighten until screws
are snug.
AssembleSpray Gun Holders
1. Insert top spray gun clip holder into slots at top of unit.
2. Push holder towards rear of unit to lock it into position.
i
3. Insert bottom spray gun holder into slots at the bottom
unit.
4. Push holder towards front of unit to lock it into
position.
5. Place spray gun onto holders.