General Problems - Dell W3207C Manual De Propietario

General Problems

Problem
Poor picture quality while watching
TV and using a device such as a DVD
player or a VCR
Poor picture quality when using a
device connected to the ANT/Cable
(coaxial) connector
DELL CONFIDENTIAL – PRELIMINARY 6/30/06 – FOR PROOF ONLY
34
Troubleshooting Problems With Your TV
FILE LOCATION: C:\Documents and Settings\cherylyuan\Ƈ¦±\FM\ch5e.fm
Possible Solution
Check the aspect ratio settings in the TV Menu. Press the Menu
1
button on the remote control and select Size. For more
information on using the TV Menu, see "Using the TV Menu" on
page 25.
Reconnect the device using the same type of connector. For
2
example, if you are using the composite connector on the bottom,
try connecting the device to the composite connector on the side
of the TV display. See "About Your TV" on page 5 for the location
of the connectors. After you connect the device, change the input
source in the TV Menu. See "Input Select" on page 26 for more
information.
Connect the device using a different connector. For example, if
3
you are experiencing the problem using a composite connector, try
using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 26 for more information.
Reset the original factory defaults. Press Menu on the remote
4
control, select Setup, and then select Factory Reset.
Adjust the color temperature. Press Menu on the remote control,
5
select Picture Setting, and then select Color Temperature.
NOTE:
Some set top boxes offer aspect ratio. See your device
documentation for more information.
Ensure TV display is selected as the input source in the Input
1
Source menu. See "Input Select" on page 26 for more information.
Press Menu on the remote control, select Setup, and then select
2
Channel Setup. This resets the channels on your TV.
Check the aspect ratio settings in the TV Menu. Press the Menu
3
button on the remote control and select Size. For more
information on using the TV Menu, see "Using the TV Menu" on
page 25.
Reset the original factory defaults. Press Menu on the remote
4
control, select Setup, and then select Factory Reset.
Adjust the color temperature. Press Menu on the remote control,
5
select Picture, and then select Color Temperature.
The problem may be with your device, contact your service
6
provider.