Antenna Connections - Sansui HDLCD1955 Manual De Instrucciones

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see page 12 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin lead wire)
Antenna
Jack
300-75 ohm
75 ohm
Matching
Coaxial
Transformer
Cable
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin lead wires)
Combiner
UHF 300 ohm
300-75 ohm Matching Transformer
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin lead wires)
Combiner
UHF 300 ohm

Antenna connections

Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
Antenna
Jack
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
Connect the UHF 300 ohm twin-lead wire to
the Combiner (not supplied). Connect the VHF
300 ohm twin-lead wire to the 300-75 ohm
Matching Transformer. Attach the Transformer to
Antenna
the Combiner, then attach the Combiner to the
Jack
Antenna Jack.
VHF 300 ohm
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the Combiner (not supplied). Attach
Antenna the Combiner to the Antenna Jack.
Jack
VHF 75 ohm
11