Clear All; Checking The Digital-Signal Strength; Labeling Channels; Labeling Video Inputs - Sansui HDLCD1955 Manual De Instrucciones

Clear All

All channels are deleted from the channel memory.
1
Select "Channel", then press
2
Press or to select "Add/Delete", then press
or ENTER.
3
Press or to select "Clear All", then press
or ENTER.
Add/Delete
Adding Channel >>
Add/Delete >>
Clear A l >>
: Select ENTER:Set
Checking the digital
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1
Select "Channel", then press
2
Press or to select "DTV Signal".
3
Press or ENTER to check the Digital-signal
strength.
The Digital-Signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
DTV Signal
0 50 100
Signal Level
NOTE:
• Signal meter feature is not available for analog
channels.
• After 240 seconds, DTV Signal screen will return to
normal TV-operation automatically.

Labeling channels

Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel.
To create channel labels
1
Select "Channel", then press
2
Press or to select "Ch Label", then press
or ENTER.
The "Ch Label" menu will appear.
3
Press or to select a channel you want to
label, then press .
or ENTER.
4
or ENTER.
5
6
To clear a Ch Label
After step 3 above, press
Clear", then press
NOTE:
• The channel labels will be reset after "Automatic
Search" on page 18.

Labeling video inputs

The Video Label feature allows you to label each
input source for your TV.
1
2
3
4
or ENTER.
Ch Label
Channel Number 15 1
Ch Label
Label Clear >>
: Select : Adjust
Press or repeatedly until the character you
want appears in the first space.
Ch Label
Channel Number 15 1
Ch Label A
Label Clear >>
: Select : Adjust ENTER:Set
The characters rotation as follows:
, () @ / + =
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
When you finish inputting the label name, press
EXIT to return to the normal screen.
Repeat steps 3-4 for other channel. You can
assign a label to each channel.
or
or ENTER.
Select "Setup", then press
Press or to select "Video Label", then
press or ENTER.
Press or to select an input which you want
to label.
Press or to select the desired label for that
input source.
Video Label
Video
Component
: Select : Adjust
– : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
to select "Label
or ENTER.
19