Ingersoll Rand 270G Instrucciones página 5

CAUTION
Dispose of hazardous fluid according to all local, state,
and national guidelines.
WARNING
Always turn off the air supply and disconnect the air
supply hose before installing, removing or adjusting
any accessory on this tool, or before performing any
maintenance on this tool.
Clean spray gun and canisters immediately after use.
Paint or other fluids can dry quickly and can easily plug
internal passageways and render the spray gun useless.
WARNING
Do not use Methylene chloride (Dichloromethane) or
any halogenated hydrocarbon solvents with this
spray gun.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and the parts be separated by material so that they can be recycled.
MAINTENANCE
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
Remove and empty the canister. Rinse canister with a
solvent recommended for the paint being used.
Fill canister with solvent and attach to spray gun. Spray
solvent into an approved container, while shaking the
gun vigorously. Continue until all traces of paint have
been eliminated from spray. Also wipe the exterior of
the gun with a rag soaked with the solvent.
Remove the air cap and soak in solvent. Use a toothpick
or plastic brush, to clean air passages.
Using metal objects can damage the precision air
passages. DO NOT soak spray gun in solvent. This
can damage non-metallic components.
After cleaning, lubricate lightly in the areas shown in
the exploded view with NON-SILICONE OIL. Sili-
cone oil can cause oil spots to occur in the paint.
NOTICE
5
NOTICE
NOTICE